Lrexlib 2.4 Reference Manual

match

rex.match (subj, patt, [init], [cf], [ef], [lo], [syn])

or

r:match (subj, [init], [ef])

The function searches for the first match of the regexp patt in the string subj, starting from offset init, subject to flags cf and ef.

Parameter	Description	Type	Default Value
r	regex object produced by new	userdata	n/a
subj	subject	string	n/a
patt	regular expression pattern	string or userdata	n/a
[init]	start offset in the subject (can be negative)	number	1
[cf]	compilation flags (bitwise OR)	number	cf
[ef]	execution flags (bitwise OR)	number	ef
[lo]	[PCRE, Oniguruma] locale	string or userdata	locale
[syn]	[Oniguruma] syntax	string	syntax

Returns on success:

1. All substring matches ("captures"), in the order they appear in the pattern. false is returned for sub-patterns that did not participate in the match. If the pattern specified no captures then the whole matched substring is returned.

Returns on failure:

1. nil

find

rex.find (subj, patt, [init], [cf], [ef], [lo], [syn])

or

r:find (subj, [init], [ef])

The function searches for the first match of the regexp patt in the string subj, starting from offset init, subject to flags cf and ef.

Parameter	Description	Type	Default Value
r	regex object produced by new	userdata	n/a
subj	subject	string	n/a
patt	regular expression pattern	string or userdata	n/a
[init]	start offset in the subject (can be negative)	number	1
[cf]	compilation flags (bitwise OR)	number	cf
[ef]	execution flags (bitwise OR)	number	ef
[lo]	[PCRE, Oniguruma] locale	string or userdata	locale
[syn]	[Oniguruma] syntax	string	syntax

Returns on success:

1. The start point of the match (a number).
2. The end point of the match (a number).
3. All substring matches ("captures"), in the order they appear in the pattern. false is returned for sub-patterns that did not participate in the match.

Returns on failure:

1. nil

gmatch

rex.gmatch (subj, patt, [cf], [ef], [lo], [syn])

The function is intended for use in the generic for Lua construct. It returns an iterator for repeated matching of the pattern patt in the string subj, subject to flags cf and ef.

Parameter	Description	Type	Default Value
subj	subject	string	n/a
patt	regular expression pattern	string or userdata	n/a
[cf]	compilation flags (bitwise OR)	number	cf
[ef]	execution flags (bitwise OR)	number	ef
[lo]	[PCRE, Oniguruma] locale	string or userdata	locale
[syn]	[Oniguruma] syntax	string	syntax

The iterator function is called by Lua. On every iteration (that is, on every match), it returns all captures in the order they appear in the pattern (or the entire match if the pattern specified no captures). The iteration will continue till the subject fails to match.

gsub

rex.gsub (subj, patt, repl, [n], [cf], [ef], [lo], [syn])

This function searches for all matches of the pattern patt in the string subj and replaces them according to the parameters repl and n (see details below).

Parameter	Description	Type	Default Value
subj	subject	string	n/a
patt	regular expression pattern	string or userdata	n/a
repl	substitution source	string, function or table	n/a
[n]	maximum number of matches to search for, or control function, or nil	number or function	nil
[cf]	compilation flags (bitwise OR)	number	cf
[ef]	execution flags (bitwise OR)	number	ef
[lo]	[PCRE, Oniguruma] locale	string or userdata	locale
[syn]	[Oniguruma] syntax	string	syntax

Returns:

1. The subject string with the substitutions made.
2. Number of matches found.
3. Number of substitutions made.

Details:

The parameter repl can be either a string, a function or a table. On each match made, it is converted into a value repl_out that may be used for the replacement.

repl_out is generated differently depending on the type of repl:

1. If repl is a string then it is treated as a template for substitution, where the %X occurences in repl are handled in a special way, depending on the value of the character X:

• if X represents a digit, then each %X occurence is substituted by the value of the X-th submatch (capture), with the following cases handled specially:
  • each %0 is substituted by the entire match
  • if the pattern contains no captures, then each %1 is substituted by the entire match
  • any other %X where X is greater than the number of captures in the pattern will generate an error ("invalid capture index")
  • if the pattern does contain a capture with number X but that capture didn't participate in the match, then %X is substituted by an empty string
• if X is any non-digit character then %X is substituted by X

All parts of repl other than %X are copied to repl_out verbatim.

2. If repl is a function then it is called on each match with the submatches passed as parameters (if there are no submatches then the entire match is passed as the only parameter). repl_out is the return value of the repl call, and is interpreted as follows:

• if it is a string or a number (coerced to a string), then the replacement value is that string;
• if it is a nil or a false, then no replacement is to be done;

3. If repl is a table then repl_out is repl [m1], where m1 is the first submatch (or the entire match if there are no submatches), following the same rules as for the return value of repl call, described in the above paragraph.

Note: Under some circumstances, the value of repl_out may be ignored; see below.

gsub behaves differently depending on the type of n:

1. If n is a number then it is treated as the maximum number of matches to search for (an omitted or nil value means an unlimited number of matches). On each match, the replacement value is the repl_out string (see above).

2. If n is a function, then it is called on each match, after repl_out is produced (so if repl is a function, it will be called prior to the n call).

   n receives 3 arguments and returns 2 values. Its arguments are:

   1. The start offset of the match (a number)
   2. The end offset of the match (a number)
   3. repl_out

   The type of its first return controls the replacement produced by gsub for the current match:

   • true -- replace/don't replace, according to repl_out;
   • nil/false -- don't replace;
   • a string (or a number coerced to a string) -- replace by that string;

   The type of its second return controls gsub behavior after the current match is handled:

   • nil/false -- no changes: n will be called on the next match;
   • true -- search for an unlimited number of matches; n will not be called again;
   • a number -- maximum number of matches to search for, beginning from the next match; n will not be called again;

split

rex.split (subj, sep, [cf], [ef], [lo], [syn])

The function is intended for use in the generic for Lua construct. It is used for splitting a subject string subj into parts (sections). The sep parameter is a regular expression pattern representing separators between the sections.

The function returns an iterator for repeated matching of the pattern sep in the string subj, subject to flags cf and ef.

Parameter	Description	Type	Default Value
subj	subject	string	n/a
sep	separator (regular expression pattern)	string or userdata	n/a
[cf]	compilation flags (bitwise OR)	number	cf
[ef]	execution flags (bitwise OR)	number	ef
[lo]	[PCRE, Oniguruma] locale	string or userdata	locale
[syn]	[Oniguruma] syntax	string	syntax

On every iteration pass, the iterator returns:

1. A subject section (can be an empty string), followed by
2. All captures in the order they appear in the sep pattern (or the entire match if the sep pattern specified no captures). If there is no match (this can occur only in the last iteration), then nothing is returned after the subject section.

The iteration will continue till the end of the subject. Unlike gmatch, there will always be at least one iteration pass, even if there are no matches in the subject.

flags

rex.flags ([tb])

This function returns a table containing the numeric values of the constants defined by the used regex library, with the keys being the (string) names of the constants. If the table argument tb is supplied then it is used as the output table, otherwise a new table is created.

The constants contained in the returned table can then be used in most functions and methods where compilation flags or execution flags can be specified. They can also be used for comparing with return codes of some functions and methods for determining the reason of failure. For details, see the POSIX, PCRE and Oniguruma documentation.

Parameter	Description	Type	Default Value
[tb]	a table for placing results into	table	nil

Returns:

1. A table filled with the results.

Notes: The keys in the tb table are formed from the names of the corresponding constants in the used library. They are formed as follows:

• POSIX: prefix REG_ is omitted, e.g. REG_ICASE becomes "ICASE".
• PCRE: prefix PCRE_ is omitted, e.g. PCRE_CASELESS becomes "CASELESS".
• Oniguruma: names of constants are converted to strings with no alteration, but for ONIG_OPTION_xxx constants, alias strings are created additionally, e.g., the value of ONIG_OPTION_IGNORECASE constant becomes accessible via either of two keys: "ONIG_OPTION_IGNORECASE" and "IGNORECASE".

new

rex.new (patt, [cf], [lo], [syn])

The functions compiles regular expression patt into a regular expression object whose internal representation is corresponding to the library used. The returned result then can be used by the methods, e.g. tfind, exec, etc. Regular expression objects are automatically garbage collected.

Parameter	Description	Type	Default Value
patt	regular expression pattern	string	n/a
[cf]	compilation flags (bitwise OR)	number	cf
[lo]	[PCRE, Oniguruma] locale	string or userdata	locale
[syn]	[Oniguruma] syntax	string	syntax

Returns:

1. Compiled regular expression (a userdata).

tfind

r:tfind (subj, [init], [ef])

The method searches for the first match of the compiled regexp r in the string subj, starting from offset init, subject to execution flags ef.

Parameter	Description	Type	Default Value
r	regex object produced by new	userdata	n/a
subj	subject	string	n/a
[init]	start offset in the subject (can be negative)	number	1
[ef]	execution flags (bitwise OR)	number	ef

Returns on success:

1. The start point of the match (a number).
2. The end point of the match (a number).
3. Substring matches ("captures" in Lua terminology) are returned as a third result, in a table. This table contains false in the positions where the corresponding sub-pattern did not participate in the match.
   1. PCRE, Oniguruma: if named subpatterns are used then the table also contains substring matches keyed by their correspondent subpattern names (strings).

Returns on failure:

1. nil

Notes:

1. If named subpatterns (see PCRE and Oniguruma docs) are used then the returned table also contains substring matches keyed by their correspondent subpattern names (strings).

exec

r:exec (subj, [init], [ef])

The method searches for the first match of the compiled regexp r in the string subj, starting from offset init, subject to execution flags ef.

Parameter	Description	Type	Default Value
r	regex object produced by new	userdata	n/a
subj	subject	string	n/a
[init]	start offset in the subject (can be negative)	number	1
[ef]	execution flags (bitwise OR)	number	ef

Returns on success:

1. The start point of the first match (a number).
2. The end point of the first match (a number).
3. The offsets of substring matches ("captures" in Lua terminology) are returned as a third result, in a table. This table contains false in the positions where the corresponding sub-pattern did not participate in the match.
   1. PCRE, Oniguruma: if named subpatterns are used then the table also contains substring matches keyed by their correspondent subpattern names (strings).

Returns on failure:

1. nil

Example:

If the whole match is at offsets 10,20 and substring matches are at offsets 12,14 and 16,19 then the function returns the following: 10, 20, { 12,14,16,19 }.

dfa_exec

[PCRE 6.0 and later. See pcre_dfa_exec in the PCRE docs.]

r:dfa_exec (subj, [init], [ef], [ovecsize], [wscount])

The method matches a compiled regular expression r against a given subject string subj, using a DFA matching algorithm.

Parameter	Description	Type	Default Value
r	regex object produced by new	userdata	n/a
subj	subject	string	n/a
[init]	start offset in the subject (can be negative)	number	1
[ef]	execution flags (bitwise OR)	number	ef
[ovecsize]	size of the array for result offsets	number	100
[wscount]	number of elements in the working space array	number	50

Returns on success (either full or partial match):

1. The start point of the matches found (a number).
2. A table containing the end points of the matches found, the longer matches first.
3. The return value of the underlying pcre_dfa_exec call (a number).

Returns on failure (no match):

1. nil

Example:

If there are 3 matches found starting at offset 10 and ending at offsets 15, 20 and 25 then the function returns the following: 10, { 25,20,15 }, 3.

maketables

[See pcre_maketables in the PCRE docs.]

rex_pcre.maketables ()

Creates a set of character tables corresponding to the current locale and returns it as a userdata. The returned value can be passed to any Lrexlib function accepting the locale parameter.

config

[PCRE 4.0 and later. See pcre_config in the PCRE docs.]

rex_pcre.config ([tb])

This function returns a table containing the values of the configuration parameters used at PCRE library build-time. Those parameters (numbers) are keyed by their names (strings). If the table argument tb is supplied then it is used as the output table, else a new table is created.

Parameter	Description	Type	Default Value
[tb]	a table for placing results into	table	nil

Returns:

1. A table filled with the results.

rex_pcre.version

[See pcre_version in the PCRE docs.]

rex_pcre.version ()

This function returns a string containing the version of the used PCRE library and its release date.

setdefaultsyntax

rex_onig.setdefaultsyntax (syntax)

This function sets the default syntax for the Oniguruma library, according to value of the string syntax. The specified syntax will be further used for interpreting string regex patterns by all relevant functions, unless syntax argument is passed to those functions explicitly.

Returns: nothing

Examples:

1. rex_onig.setdefaultsyntax ("ASIS") -- use plain text syntax as the default
2. rex_onig.setdefaultsyntax ("PERL") -- use PERL regex syntax as the default

rex_onig.version

[See onig_version in the Oniguruma docs.]

rex_onig.version ()

This function returns a string containing the version of the used Oniguruma library.

plainfind

rex.plainfind (subj, patt, [init], [ci])

The function searches for the first match of the string patt in the subject subj, starting from offset init.

• The string patt is not regular expression, all its characters stand for themselves.
• Both strings subj and patt can have embedded zeros.
• The flag ci specifies case-insensitive search (current locale is used).
• This function uses no regex library.

Parameter	Description	Type	Default Value
subj	subject	string	n/a
patt	text to find	string	n/a
[init]	start offset in the subject (can be negative)	number	1
[ci]	case insensitive search	boolean	false

Returns on success:

1. The start point of the match (a number).
2. The end point of the match (a number).

Returns on failure:

1. nil