darktablerc

this files gives an overview over the default settings of the darktable configuration found in ~/.config/darktable/darktablerc. you might find some extra values in that configuration file that get generated by the code at runtime, this overview only has the default values that are specified during compile time. some details (like allowed range and factors when shown in the preferences dialog) are not shown here to not clutter the list too much. please have a look at the corresponding source file for up-to-date information.


key
type
default
description
allow_lab_output bool false allow XYZ and Lab color spaces as output
this is mainly useful for debugging and to create colorchecker lut styles externally.
ask_before_copy bool true ask before copying images to new film roll folder
always ask the user before any image file is copied.
ask_before_delete bool true ask before erasing images from disk / discarding history stack
always ask the user before any image file is deleted / history stack is discarded.
ask_before_move bool true ask before moving images from film roll folder
always ask the user before any image file is moved.
ask_before_remove bool true ask before removing images from database
always ask the user before any image is removed from DB.
ask_before_rmdir bool false ask before removing empty folders
always ask the user before removing any empty folder. this can happen after moving or deleting images.
bauhaus/scale float 1.4 widget scale
scaling factor for bauhaus widgets, will affect font size
brush_smoothing enum
  • low
  • medium
  • high
 medium smoothing of brush strokes
sets level for smoothing of brush strokes. stronger smoothing leads to less nodes and easier editing but with lower control of accuracy.
cache_color_managed bool true color manage cached thumbnails
if enabled, cached thumbnails will be color managed so that lighttable and filmstrip can show correct colors. otherwise the results may look wrong once the display profile gets changed.
cache_disk_backend bool true enable disk backend for thumbnail cache
if enabled, write thumbnails to disk (.cache/darktable/) when evicted from the memory cache. note that this can take a lot of memory (several gigabytes for 20k images) and will never delete cached thumbnails again. it's safe though to delete these manually, if you want. light table performance will be increased greatly when browsing a lot. to generate all thumbnails of your entire collection offline, run 'darktable-generate-cache'.
cache_memory int64 (1024 * 1024 * 256) memory in megabytes to use for thumbnail cache
this controls how much memory is going to be used for thumbnails and other buffers (needs a restart).
channel_display enum
  • false color
  • grey scale
 false color display of individual color channels
defines how color channels are displayed when activated in the parametric masks feature.
codepaths/openmp_simd bool false enable usage of OpenMP SIMD codepaths. if enabled, and such codepath exists, it will have the highest priority
codepaths/sse2 bool true enable usage of SSE2-optimized codepaths
compress_xmp_tags enum
  • never
  • always
  • only large entries
 only large entries store xmp tags in compressed format
entries in xmp tags can get rather large and may exceed the available space to store the history stack in output files. this option allows xmp tags to be compressed and save space.
darkroom/ui/overexposed/colorscheme int 1
darkroom/ui/overexposed/lower float 2.0
darkroom/ui/overexposed/upper float 98.0
darkroom/ui/rawoverexposed/colorscheme int 0
darkroom/ui/rawoverexposed/mode int 0
darkroom/ui/rawoverexposed/threshold float 1.0
darkroom/ui/scale_precise_step_multiplier float 0.1 the multiplier that is applied to any slider precise value change
any slider value change will be multiplied by this number, when changing slider while holding CTRL modifier
darkroom/ui/scale_rough_step_multiplier float 10.0 the multiplier that is applied to any slider rough value change
any slider value change will be multiplied by this number, when changing slider while holding SHIFT modifier
darkroom/ui/scale_step_multiplier float 1.0 the multiplier that is applied to any slider value change
any slider value change will be multiplied by this number, when changing slider while NOT holding SHIFT or CTRL modifiers
darkroom/ui/scroll_to_module bool true scroll to darkroom modules when expanded/collapsed
when this option is enabled then darktable will try to scroll the module to the top of the visible list
darkroom/ui/single_module bool true expand a single darkroom module at a time
this option toggles the behavior of shift clicking in darkroom mode
database string library.db database location
filename relative to ~/.config/darktable or starting with a slash (needs a restart).
database_cache_quality int 89 JPEG quality of on-disk thumbnails
affects only the thumbnail cache used for quick startup.
host_memory_limit int 1500 host memory limit (in MB) for tiling
this variable controls the maximum amount of memory (in MB) a module may use during image processing. lower values will force memory hungry modules to process image with increasing number of tiles. setting this to 0 will omit any limit. values below 500 will be treated as 500 (needs a restart).
lighttable/ui/expose_statuses bool false always show thumbnail overlays
show overlays (rating stars, "edited" mark, etc) for all thumbnails in file manager, not only hovered one
lighttable/ui/scroll_to_module bool false scroll to lighttable modules when expanded/collapsed
when this option is enabled then darktable will try to scroll the module to the top of the visible list
lighttable/ui/single_module bool false expand a single lighttable module at a time
this option toggles the behavior of shift clicking in lighttable mode
maximum_number_tiles int 10000 assumed maximum sane number of tiles
if during tiling this number is exceeded darktable assumes that tiling is not possible and falls back to untiled processing - with all system memory limits taking full effect. in case you want to process huge images you may want to increase this number.
metadata/resolution int 300
never_use_embedded_thumb bool false don't use embedded preview JPEG but half-size raw
check this option to not use the embedded JPEG from the raw file but process the raw data. this is slower but gives you color managed thumbnails.
omit_tag_hierarchy bool false omit hierarchy in simple tag lists
when exporting images the hierarchical tags are also added as a simple list of non-hierarchical ones to make them visible to some other programs. when this option is checked darktable will only include their last part and ignore the rest. so 'foo|bar|baz' will only add 'baz'.
opencl bool true activate OpenCL support
if found, use OpenCL runtime on your system for improved processing speed. can be switched on and off at any time.
opencl_async_pixelpipe bool false run OpenCL pixelpipe asynchronously
if set to TRUE OpenCL pixelpipe will not be synchronized on a per-module basis. this can improve pixelpipe latency. however, potential OpenCL errors would be detected late; in such a case the complete pixelpipe needs to be reprocessed instead of only a single module. export pixelpipe will always be run synchronously.
opencl_avoid_atomics bool false do not run OpenCL kernels which require atomic operations
if set to TRUE darktable will not use OpenCL kernels which contain atomic operations (example bilateral). pixelpipe processing will be done on CPU for the affected modules. useful if your OpenCL implementation freezes/crashes on atomics or if they are processed with a bad performance.
opencl_checksum string checksum representing the setup of opencl devices on this computer
darktable re-checks the performance benchmarks of your system in case your setup has changed, which is indicated by a change versus the stored checksum in this config variable; darktable de-activates opencl if the GPU benchmark lies below the one of the CPU.
opencl_device_priority string */!0,*/*/* priority of OpenCL devices for each pixelpipe type
defines priorities on how (multiple) OpenCL devices are allocated to the different types of pixelpipe (full, preview, export, thumbnail). for more details visit our usermanual (needs a restart).
opencl_disable_drivers_blacklist bool false whether to allow some partial opencl implementations to be used or not
not all opencl implementations are fully-functional, there are at least two, which are not production-quality yet: pocl and beignet; therefore at this point in time, it is better to explicitly blacklist them by default. can be changed by setting this configuration option to TRUE (needs a restart).
opencl_library string system library with OpenCL runtime
OpenCL runtime library is normally detected automatically by darktable. if your OpenCL runtime is at an unusual place and cannot be detected, enter the full pathname here. leave empty for default behavior.
opencl_mandatory_timeout int 200 timeout period for locking mandatory opencl device
time period (in units of 5ms) after which we give up try-locking an opencl device for mandatory use. defaults to 200.
opencl_memory_headroom int 300 amount of OpenCL memory (in MB) which we assume as being reserved for the driver
this amount of memory (in MB) will be substracted from total GPU memory in order to calculate the available OpenCL memory. too low values will lead to out-of-memory situations in OpenCL processing. too high values will lead to unnecessary tiling (needs a restart).
opencl_memory_requirement int 768 minmum amount of GPU memory (MB) required to activate OpenCL
OpenCL will only be activated if your graphics card has at least this amount of memory. reducing the value will allow cards with less GPU memory to be used - but at the risk of lower system stability and occasional crashes. values below 200 will be treated as 200.
opencl_micro_nap int 1000 pause OpenCL processing for this number of microseconds from time to time
for slow GPUs this gives your graphics driver some time to breathe to do needed screen updates. can be left at zero for fast devices.
opencl_number_event_handles int 25 the number of OpenCL event handles darktable can use
a positive non-zero integer defines the number of event handles that darktable may have opened on a device. a value of -1 does not pose any restrictions, bearing the risk of hitting the device's resource limits. a value of zero completely prevents the use of event handles.
opencl_scheduling_profile enum
  • default
  • multiple GPUs
  • very fast GPU
 default OpenCL scheduling profile
defines how preview and full pixelpipe tasks are scheduled on OpenCL enabled systems. default - GPU processes full and CPU processes preview pipe (adaptable by config parameters); multiple GPUs - process both pixelpipes in parallel on two different GPUs; very fast GPU - process both pixelipes sequentially on the GPU.
opencl_size_roundup int 16 round OpenCL work group sizes to a multiple of
in OpenCL processing round width/height of global work groups to a multiple of this value. reasonable values are powers of 2. this parameter can have high impact on OpenCL performance.
opencl_synch_cache bool false copy back OpenCL buffers into pixelpipe cache after each module
this brings pixelpipe cache and OpenCL buffers in synch after each module. on slow GPUs this might improve speed as it avoids reprocessing the whole pixelpipe on every parameter change. on fast GPUs the additional memory transfer overhead will slow down OpenCL considerably.
opencl_use_cpu_devices bool false whether to make use of CPU OpenCL devices
typically darktable's hand-optimized CPU code is much faster than any OpenCL-on-CPU code; therefore CPUs are excluded from being used as OpenCL devices by default. can be changed by setting this configuration option to TRUE (needs a restart).
opencl_use_pinned_memory bool false whether to use pinned memory transfer during tiling
during tiling huge amounts of memory need to be transferred between host and device. for some OpenCL implementations direct memory transfers give a drastic performance penalty. this can often be avoided by using indirect transfers via pinned memory. other devices have more efficient direct memory transfer implementations. AMD seems to belong to the first group, nvidia to the second.
panel_width int 350 width of the side panels in pixels
(needs a restart)
performance_configuration_version_completed int 0 version of the last completed performance configuration
what was the last performance configuration which has been completed
pixelpipe_synchronization_timeout int 200 timeout period of pixelpipe synchronization
time period (in units of 5ms) after which synchronization of preview and full pixelpipe is assumed to have failed. set to zero to omit pixelpipe synchronization. defaults to 200.
please_let_me_suffer_by_using_32bit_darktable bool false if using a 32-bit build, hide the message recommending a 64-bit build
the 32-bit build of darktable is known to exhibit sporadic issues and crashes. we show a warning message hinting at this issue. with this option, you can suppress the warning.
plugins/capture/camera/import/jobcode string noname jobcode of import job
plugins/capture/jobcode string capture job name of capture job
plugins/capture/mode int 0 capture view mode
plugins/capture/storage/basedirectory string $(PICTURES_FOLDER)/darktable path of storage for captured images
plugins/capture/storage/namepattern string $(YEAR)$(MONTH)$(DAY)_$(SEQUENCE).$(FILE_EXTENSION) rename pattern for captured images
plugins/capture/storage/subpath string $(YEAR)$(MONTH)$(DAY)_$(JOBCODE) subpath pattern in storage for captured images
plugins/collection/descending bool false
plugins/collection/film_id int 1
plugins/collection/filter_flags int 3
plugins/collection/query_flags int 3
plugins/collection/rating int 1
plugins/collection/rating_comparator int 3
plugins/collection/sort int 0
plugins/darkroom/active string
plugins/darkroom/ashift/near_delta float 20.0
plugins/darkroom/basecurve/auto_apply_percamera_presets bool false auto-apply per camera basecurve presets
use the per-camera basecurve by default instead of the generic manufacturer one if there is one available (needs a restart)
plugins/darkroom/basecurve/visible bool true
plugins/darkroom/clahe/visible bool true
plugins/darkroom/clipping/guide int 0 last chosen guide style
plugins/darkroom/clipping/ratio_d int 0 last chosen aspect ratio denominator
plugins/darkroom/clipping/ratio_n int 0 last chosen aspect ratio numerator
plugins/darkroom/clipping/visible bool true
plugins/darkroom/colisa/visible bool true
plugins/darkroom/colorcorrection/visible bool true
plugins/darkroom/colorin/visible bool true
plugins/darkroom/colorout/visible bool true
plugins/darkroom/demosaic/quality enum
  • always bilinear (fast)
  • at most PPG (reasonable)
  • full (possibly slow)
 at most PPG (reasonable) demosaicing for zoomed out darkroom mode
interpolation when not viewing 1:1 in darkroom mode: bilinear is fastest, but not as sharp. middle ground is using PPG + interpolation modes specified below, full will use exactly the settings for full-size export. X-Trans sensors use VNG rather than PPG as middle ground.
plugins/darkroom/demosaic/visible bool true
plugins/darkroom/exposure/visible bool true
plugins/darkroom/filmic/visible bool true
plugins/darkroom/flip/visible bool true
plugins/darkroom/graduatednd/visible bool true
plugins/darkroom/grain/visible bool true
plugins/darkroom/groups int 2
plugins/darkroom/highlights/visible bool true
plugins/darkroom/histogram/mode enum
  • linear
  • logarithmic
  • waveform
 logarithmic
plugins/darkroom/histogram/show_blue bool true
plugins/darkroom/histogram/show_green bool true
plugins/darkroom/histogram/show_red bool true
plugins/darkroom/lens/visible bool true
plugins/darkroom/levels/visible bool true
plugins/darkroom/masks/brush/border float 0.05
plugins/darkroom/masks/brush/density float 1.0
plugins/darkroom/masks/brush/hardness float 0.66
plugins/darkroom/masks/circle/border float 0.05
plugins/darkroom/masks/circle/size float 0.05
plugins/darkroom/masks/ellipse/border float 0.05
plugins/darkroom/masks/ellipse/flags int 0
plugins/darkroom/masks/ellipse/radius_a float 0.05
plugins/darkroom/masks/ellipse/radius_b float 0.03535
plugins/darkroom/masks/ellipse/rotation float 90.0
plugins/darkroom/masks/gradient/compression float 0.5
plugins/darkroom/masks/gradient/rotation float 0.0
plugins/darkroom/masks/gradient/steepness float 0.0
plugins/darkroom/masks/path/border float 0.05
plugins/darkroom/monochrome/visible bool true
plugins/darkroom/rawprepare/allow_editing_crop bool false allow editing raw cropping boundaries
this is mainly useful for debugging and to add new camera support.
plugins/darkroom/shadhi/visible bool true
plugins/darkroom/sharpen/visible bool true
plugins/darkroom/spots/brush_border float 0.05
plugins/darkroom/spots/brush_density float 1.0
plugins/darkroom/spots/brush_hardness float 0.66
plugins/darkroom/spots/circle_border float 0.02
plugins/darkroom/spots/circle_size float 0.02
plugins/darkroom/spots/ellipse_border float 0.02
plugins/darkroom/spots/ellipse_flags int 0
plugins/darkroom/spots/ellipse_radius_a float 0.02
plugins/darkroom/spots/ellipse_radius_b float 0.01414
plugins/darkroom/spots/ellipse_rotation float 90.0
plugins/darkroom/spots/path_border float 0.05
plugins/darkroom/tagging/visible bool true
plugins/darkroom/temperature/visible bool true
plugins/darkroom/tonecurve/visible bool true
plugins/darkroom/ui/border_size int 20 border around image in darkroom mode
process the image in darkroom mode with a small border. set to 0 if you don't want any border.
plugins/darkroom/vignette/visible bool true
plugins/imageio/format/jpeg/quality int 95
plugins/imageio/format/pdf/border string 0 mm
plugins/imageio/format/pdf/compression int 1
plugins/imageio/format/pdf/dpi float 300
plugins/imageio/format/pdf/size string a4
plugins/imageio/format/png/bpp int 8
plugins/imageio/format/png/compression int 5
plugins/imageio/format/tiff/bpp int 8
plugins/imageio/format/tiff/compress int 2
plugins/imageio/format/tiff/compresslevel int 5
plugins/imageio/storage/disk/file_directory string $(FILE_FOLDER)/darktable_exported/$(FILE_NAME)
plugins/imageio/storage/email/client string client to use, this overrides detection of default client.
plugins/imageio/storage/gallery/file_directory string $(HOME)/darktable_gallery/img_$(SEQUENCE)
plugins/imageio/storage/gallery/title string darktable gallery
plugins/lighttable/audio_player string aplay executable for playing audio files
this external program is used to play audio files some cameras record to keep notes for images
plugins/lighttable/collect/item0 int 0
plugins/lighttable/collect/item1 int 0
plugins/lighttable/collect/item2 int 0
plugins/lighttable/collect/item3 int 0
plugins/lighttable/collect/item4 int 0
plugins/lighttable/collect/item5 int 0
plugins/lighttable/collect/item6 int 0
plugins/lighttable/collect/item7 int 0
plugins/lighttable/collect/item8 int 0
plugins/lighttable/collect/item9 int 0
plugins/lighttable/collect/mode0 int 0
plugins/lighttable/collect/mode1 int 0
plugins/lighttable/collect/mode2 int 0
plugins/lighttable/collect/mode3 int 0
plugins/lighttable/collect/mode4 int 0
plugins/lighttable/collect/mode5 int 0
plugins/lighttable/collect/mode6 int 0
plugins/lighttable/collect/mode7 int 0
plugins/lighttable/collect/mode8 int 0
plugins/lighttable/collect/mode9 int 0
plugins/lighttable/collect/num_rules int 0
plugins/lighttable/collect/string0 string
plugins/lighttable/collect/string1 string
plugins/lighttable/collect/string2 string
plugins/lighttable/collect/string3 string
plugins/lighttable/collect/string4 string
plugins/lighttable/collect/string5 string
plugins/lighttable/collect/string6 string
plugins/lighttable/collect/string7 string
plugins/lighttable/collect/string8 string
plugins/lighttable/collect/string9 string
plugins/lighttable/copy_history/pastemode int 0 append or replace history stack if pasted
0 -- append on top of stack, 1 -- replace it.
plugins/lighttable/draw_custom_metadata bool false overlay txt sidecar over zoomed images
when there is a txt file next to an image it can be shown as an overlay over zoomed images on the lighttable. the txt file either has to be there at import time or the crawler has to be enabled
plugins/lighttable/draw_group_borders bool true draw borders around grouped images
draw borders around grouped images when grouping is turned off and the mouse hovers over one of the images of the group
plugins/lighttable/export/force_lcms2 bool false always use LittleCMS 2 to apply output color profile
this is slower than the default.
plugins/lighttable/export/format_name string jpeg
plugins/lighttable/export/height int 0 height of the exported image
height of the exported image, or 0 if no scaling should be done.
plugins/lighttable/export/high_quality_processing bool false do high quality resampling during export
the image will first be processed in full resolution, and downscaled at the very end. this can result in better quality sometimes, but will always be slower.
plugins/lighttable/export/iccintent int -1 ICC rendering intent
if non-negative, this overrides the per-image output color profile rendering intent on export.
plugins/lighttable/export/iccprofile string ICC profile filename to use for export
this overrides the per-image settings, if icctype not set to -1.
plugins/lighttable/export/icctype int -1 ICC profile type to use for export
this overrides the per-image settings, if not set to -1.
plugins/lighttable/export/pixel_interpolator enum
  • bilinear
  • bicubic
  • lanczos2
  • lanczos3
 lanczos3 pixel interpolator
pixel interpolator used in rotation and lens correction (bilinear, bicubic, lanczos2, lanczos3).
plugins/lighttable/export/storage_name string disk
plugins/lighttable/export/style string
plugins/lighttable/export/width int 0 width of the exported image
width of the exported image, or 0 if no scaling should be done.
plugins/lighttable/extended_thumb_overlay bool false enable extended thumb overlay
if set to true, thumb overlay shows filename and some exif data.
plugins/lighttable/filmstrip/height int 120 height of filmstrip
height of the filmstrip in pixels
plugins/lighttable/filmstrip/visible bool true enable filmstrip
enable the filmstrip in darkroom, tethering and map modes.
plugins/lighttable/images_in_row int 5 images per row
plugins/lighttable/layout int 1 lighttable layout mode
select a layout for the lighttable: 0 - zoomable lighttable or 1 - file manager.
plugins/lighttable/low_quality_thumbnails bool false low quality thumbnails
if set to true, thumbnails will be processed by first downscaling rather than demosaicing the full image. this can result in much faster processing times and blurrier images, especially when you cropped a lot.
plugins/lighttable/metadata_view/pretty_location bool true pretty print the image location
show a more readable representation of the location in the image information module
plugins/lighttable/preview/full_size_preload_count int 1 preload images for full-size preview
number of images to load in advance in the background when showing full-size preview
plugins/lighttable/recentcollect/line0 string
plugins/lighttable/recentcollect/line1 string
plugins/lighttable/recentcollect/line2 string
plugins/lighttable/recentcollect/line3 string
plugins/lighttable/recentcollect/line4 string
plugins/lighttable/recentcollect/line5 string
plugins/lighttable/recentcollect/line6 string
plugins/lighttable/recentcollect/line7 string
plugins/lighttable/recentcollect/line8 string
plugins/lighttable/recentcollect/line9 string
plugins/lighttable/recentcollect/num_items int 0
plugins/lighttable/tagging/ask_before_delete_tag bool true ask before deleting a tag
plugins/lighttable/thumbnail_hq_min_level enum
  • always
  • small
  • VGA
  • 720p
  • 1080p
  • WQXGA
  • 4K
  • 5K
  • never
 720p high quality thumb processing from size
if the thumbnail size is greater than this value, it will be processed using the full quality rendering path (better but slower).
plugins/map/filter_images_drawn bool FALSE only draw images on map that are currently collected and filtered
use the current filter settings to select the geotagged images drawn on the map, i.e. limit the images drawn to the current filmstrip. this limits the number of images drawn and thus reduces the time needed to draw the images.
plugins/map/geotagging_search_url string https://nominatim.openstreetmap.org/search/%s?format=xml&limit=%d&polygon_text=1 Geotagging search URL
this can be changed when the default OpenStreetMap search URL is broken
plugins/map/max_images_drawn int 100 maximum number of images drawn on map
the maximum number of geotagged images drawn on the map. increasing this number can slow drawing of the map down.
plugins/map/max_outline_nodes int 10000
plugins/map/show_map_osd bool true
plugins/map/show_outline bool true Whether to highlight the search result on the map
plugins/print/print/black_point_compensation bool true
plugins/pwstorage/pwstorage_backend enum
  • auto
  • none
  • libsecret
  • kwallet
 auto password storage backend to use
the storage backend for password storage: auto, none, libsecret, kwallet
plugins/slideshow/high_quality bool true do high quality processing for slideshow
same option as for export, but applies to slideshow.
pressure_sensitivity enum
  • off
  • hardness (relative)
  • hardness (absolute)
  • opacity (relative)
  • opacity (absolute)
  • brush size (relative)
 off pen pressure control for brush masks
off - pressure reading ignored, hardness/opacity/brush size - pressure reading controls specified attribute, absolute/relative - pressure reading is taken directly as attribute value or multiplied with pre-defined setting.
rating_one_double_tap bool false rating an image one star twice will not zero out the rating
do not have the rating of one star behave as documented in the manual--an image rated one star twice will result in a zero star rating.
run_crawler_on_start bool false look for updated xmp files on startup
check file modification times of all xmp files on startup to check if any got updated in the meantime
screen_dpi_overwrite float -1.0 overwrite the screen's dpi setting
if this value is > 0.0 then it is used as the screen's dpi setting which is used to scale the gui
screen_ppd_overwrite float -1.0 overwrite the screen's ppd setting
if this value is > 0.0 then it is used as the screen's ppd setting which is used for HiDPI support
scrollbars enum
  • no scrollbars
  • lighttable
  • lighttable + darkroom
 lighttable show scrollbars for center view
defines where scrollbars should be displayed
send_to_trash bool true send files to trash when erasing images
send files to trash instead of permanently deleting files on system that supports it
session/base_directory_pattern string $(PICTURES_FOLDER)/Darktable base directory naming pattern
part of full import path for an import session
session/filename_pattern string $(YEAR)$(MONTH)$(DAY)_$(SEQUENCE).$(FILE_EXTENSION) file naming pattern
file naming pattern used for a import session
session/sub_directory_pattern string $(YEAR)$(MONTH)$(DAY)_$(JOBCODE) sub directory naming pattern
part of full import path for an import session
show_folder_levels int 1 number of folder levels to show in lists
the number of folder levels to show in film roll names, starting from the right
singlebuffer_limit int 16 minimum amount of memory (in MB) for a single buffer in tiling
if set to a positive, non-zero value this variable defines the minimum amount of memory (in MB) that tiling should take for a single image buffer. has precedence over heuristics based on host_memory_limit (needs a restart).
ui_last/colorpicker_mean int 0 0: mean, 1: min, 2: max
ui_last/display_profile_source enum
  • all
  • xatom
  • colord
 all method to use for getting the display profile
this option allows to force a specific means of getting the current display profile. this is useful when one alternative gives wrong results
ui_last/expander_histogram int -1
ui_last/expander_history int -1
ui_last/expander_import int 2
ui_last/expander_metadata int 0
ui_last/expander_navigation int -1
ui_last/expander_snapshots int -1
ui_last/fullscreen bool false
ui_last/grouping bool false grouping of images
only show a single image for each set of grouped images in lighttable and filmstrip
ui_last/import_ignore_jpegs bool false ignore JPEG images when importing film rolls
when having raw+JPEG images together in one directory it makes no sense to import both. with this flag one can ignore all JPEGs found.
ui_last/import_initial_rating int 1 initial import rating
initial star rating for all images when importing a filmroll
ui_last/import_last_creator string creator to be applied when importing
ui_last/import_last_directory string last opened directory.
ui_last/import_last_publisher string publisher to be applied when importing
ui_last/import_last_rights string rights to be applied when importing
ui_last/import_last_tags string comma separated tags to be applied when importing
ui_last/import_recursive bool false recursive directory traversal when importing filmrolls
ui_last/maximized bool true
ui_last/panel_bottom int 0
ui_last/panel_left int -1
ui_last/panel_right int -1
ui_last/panel_top int 0
ui_last/view int 0
ui_last/window_h int 500
ui_last/window_w int 900
ui_last/window_x int 0
ui_last/window_y int 0
worker_threads int 2 number of background threads
this controls for example how many threads are used to create thumbnails during import. the cache will grow to a maximum of twice this number of full resolution image buffers (needs a restart).
write_sidecar_files bool true write sidecar file for each image
these redundant files can later be re-imported into a different database, preserving your changes to the image.