FILE NAME:	CP020135.scexe

TITLE:		HP Intel Online Firmware Upgrade Utility for Linux x86_64

VERSION:	1.5.17

REVISION:	0

LANGUAGE:	English

CATEGORY:	Software Solutions

DIVISIONS:	Enterprise and Mainstream Servers

EFFECTIVE DATE:	12/16/2013

SUPERSEDES:	CP018871.scexe


Products Affected
==================
HP Ethernet 1Gb  2-port 361i Adapter
HP Ethernet 1Gb  2-port 361T Adapter
HP Ethernet 1Gb  2-port 361FLB Adapter
HP Ethernet 1Gb  4-port 366i Adapter
HP Ethernet 1Gb  4-port 366M Adapter
HP Ethernet 10Gb 2-port 560FLB Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 1Gb  4-port 366FLR Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560M Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HP Ethernet 10Gb 2-port 561T Adapter
HP Ethernet 10Gb 1-port P560SFP+ Adapter
HP Ethernet 1Gb  2-port 363i Adapter
HP Ethernet 1Gb  1-port 364i Adapter
HP Ethernet 1Gb  2-port 367i Adapter
HP Ethernet 10Gb 2-port 562i Adapter


Operating Systems
==================
Red Hat Enterprise Linux 6 Update 5  for AMD64/EM64T
Red Hat Enterprise Linux 6 Update 4  for AMD64/EM64T
Red Hat Enterprise Linux 5 Update 10 for AMD64/EM64T
Red Hat Enterprise Linux 5 Update 9  for AMD64/EM64T

SUSE LINUX Enterprise Server 11 Service Pack 3 for AMD64/EM64T
SUSE LINUX Enterprise Server 11 Service Pack 2 for AMD64/EM64T


Pre-requisites
===============
ProLiant server supporting above operating systems
2GB RAM minimum
hp-igb source rpm >= 3.1.16-3


Description
============
This scexe contains the utilities and binaries for upgrading 
Firmware on HP Proliant Intel adapters on server running any
of the supported OS versions above


Enhancements/Fixes
===================
- Enhancements Description:
  - Added support for following adapters:
    HP Ethernet 1Gb  2-port 363i Adapter
    HP Ethernet 1Gb  1-port 364i Adapter
    HP Ethernet 1Gb  2-port 367i Adapter
    HP Ethernet 10Gb 2-port 562i Adapter
  - This component contains combo image version 1.464.0 with UEFI support. The
    combo image includes: Boot Agent: 1GbE - v1.5.43, 10GbE - v2.3.15 & 
    UEFI Drivers: 1GbE - v4.3.04, 10GbE - v6.1.02.

- Fixes Description:
  - Firmware Fixes:
   - FW changes w.r.t to 1.399.0 :
      * Fix the hang seen with Product Development Kit Intel� APITEST with PXE 1.5.33.
      * Fix an issue where the Windows Deployment Services fails due to PXE passing 
        dhcp option 61 with invalid UUID.
      * Fix an issue where the PXE boot was failing when the Spanning Tree Protocol was
        enabled on network switch.

Table of Contents
=================
Introduction
Packaging
Performing the Firmware Upgrade
Firmware Upgrade Log


Introduction
============
This file describes the procedure to use for upgrading firmware
on HP network adapters mentioned in the PRODUCTS AFFECTED
section of this document.

User guides and additional HP Network Adapter information can be found at:
http://h18004.www1.hp.com/products/servers/networking/index-nic.html
 
Packaging
=========
This firmware upgrade utility is released in SCEXE format. The
file is a single self-extracting executable that unpacks the
component, runs it, and cleans up. This one-step process replaces
the rpm format which would require three steps to install, execute
and remove.


Performing the Firmware Upgrade
===============================
1. Firmware can be upgraded interactively using following command:

	# ./CPxxxxxx.scexe

2. The help menu lists all available command line options.

	# ./CPxxxxxx.scexe -h

NOTE: Under certain scenarios, after updating the EPROM you may be 
required to reboot the unit and re-run this component to be able 
to update the flash ROM (OROM) on the adapters.


Firmware Upgrade Log
====================
The results of the firmware upgrade are in the CPxxxxxx.log which 
will be written to the /var/cpq/ directory. 


Copyright 2011 Hewlett-Packard Development Company, L.P.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies