FILE NAME:			CP017707.scexe	

TITLE:				HP Mellanox Online Firmware Upgrade Utility for 649282-B21 and 649283-B21 (Linux x86_64) 

VERSION:			1.1.1

REVISION:			1

LANGUAGE:			English

CATEGORY:			Software Solutions

DIVISIONS:			Enterprise and Mainstream Servers

PRODUCTS AFFECTED:
				HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter    
				HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter  
				
OPERATING SYSTEMS:
				Red Hat Enterprise Linux 6 AS/ES for x86_64
				Red Hat Enterprise Linux 5 AS/ES for x86_64
				SUSE LINUX Enterprise Server 11 for x86_64
				SUSE LINUX Enterprise Server 10 for x86_64

PREREQUISITES:  
				None

EFFECTIVE DATE: 		06/28/2012

SUPERSEDES:			CP017422.scexe

DESCRIPTION:			This scexe contains the utilities and firmware binaries 
				for the below adapter used in HP rackmount servers:
	     	                         HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter    
					 HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter    

					

ENHANCEMENTS/FIXES:
				Flashes firmware version 2.10.2350 for the below cards:
					Rev B2 FDR (PSID: HP_0230220019)
					Rev Cx FDR (PSID: HP_0230240019)
					Rev B2 FDR (PSID: HP_0230220019)
					Rev Cx QDR (PSID: HP_0230240009)

Table of Contents
=================
Introduction
Packaging
Performing the Firmware Upgrade
Firmware Upgrade Log
  
			       
Introduction
============
This file describes the firmware upgrade of the HP Mellanox ConnectX3 
InfiniBand adapters mentioned in the PRODUCTS AFFECTED section of this
document.   


Packaging
=========
The firmware upgrade utility is released in scexe format.  The file is a single
self-extracting executable that unpacks the component, runs it, and cleans
up the component. This process replaces the manual process of downloading the firmware
binary to the server, manually flashing the firmware using mstflint and verifying
the firmware version is uptodate. mstflint version 2.7.1-7 is packaged with the component 
to flash the appropriate firmware.


Performing the Firmware Upgrade
===============================

1. The firmware can be upgraded interactively using the following command:

	#./CP00xxxx.scexe 
	
2. Check the help menu for more information regarding command line options.

	#./CP00xxxx.scexe -h


Firmware Upgrade Log
====================

The results to the firmware upgrade are in the mstflint.log  which 
will be written to the current working directory.  
	
Copyright 2011 Hewlett-Packard Development Company, L.P.  Product names 
mentioned herein may be trademarks and/or registered trademarks of their 
respective companies