FILE NAME:	CP021556.scexe

TITLE:		HP QLogic P3P Online Firmware Upgrade Utility
		for Linux i386

VERSION:	1.4.19

REVISION:	0

LANGUAGE:	English

CATEGORY:	Software Solutions

DIVISIONS:	Enterprise and Mainstream Servers

EFFECTIVE DATE:	08/20/2013

SUPERSEDES:	CP021220.scexe


Products Affected
==================
HP CN1000Q Dual Port Converged Network Adapter
HP NC523SFP Dual port 10GbE Server Adapter
HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter


Operating Systems
==================
Red Hat Enterprise Linux 6 Update 4 for x86
Red Hat Enterprise Linux 6 Update 3 for x86
Red Hat Enterprise Linux 6 Update 2 for x86
Red Hat Enterprise Linux 5 Update 9 for x86
Red Hat Enterprise Linux 5 Update 8 for x86

SUSE LINUX Enterprise Server 11 Service Pack 3 for x86
SUSE LINUX Enterprise Server 11 Service Pack 2 for x86


Pre-requisites
===============
None


Description
============
This package contains the utilities and binaries for upgrading HP 
ProLiant QLogic P3P 10Gb Ethernet NICs ROM images running under 
Linux i386 platform.


Enhancements/Fixes
===================
- Enhancements Description:
  - Firmware Enhancements:
   - This component provides firmware version 4.14.26. This firmware is part of a combo image file
     p3p11351.bin (v 1.13.51) that the component uses to update to this firmware. Therefore users 
     will see information about the combo image versions in the interactive mode. 

- Fixes Description:
  - Firmware Fixes:
   - FW fixes in 4.14.26 w.r.t to 4.14.25 :
	* The firmware fixes an issue where the MAC address (that ends with '00') is incorrectly
          displayed in the ROM-Based Setup Utility (RBSU) and HP Integrated Lights-Out (iLO).


Table of Contents
=================
Introduction
Packaging
Performing the Firmware Upgrade
Firmware Upgrade Log


Introduction
============
This file describes the firmware upgrade of HP Gigabit Server Adapters
mentioned in the PRODUCTS AFFECTED section of this document.

User guides and additional HP Network Adapter information can be found at:
http://h18004.www1.hp.com/products/servers/networking/index-nic.html

 
Packaging
=========
The firmware upgrade utility is released in scexe format. The file is a
single self-extracting executable that unpacks the component, runs it, and
cleans up.


Performing the Firmware Upgrade
===============================
1. The firmware can be upgraded interactively using the following command:

		#./CPxxxxxx.scexe

2. Check the help menu for more information regarding command line options.

		#./CPxxxxxx.scexe -h


Firmware Upgrade Log
====================
Results of the firmware upgrade are written to /var/cpq/CPxxxxxx.log.


Copyright 2013 Hewlett-Packard Development Company, L.P.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies