The SOAP server that HP SUM launches uses ports
443 or 63006. You can define your own ports by modifying the hpsum.ini
file.
Open
hpsum.ini
in a text editor. You can find the file in the same folder as the HP SUM application.Look for the following lines:
Port=443
AlternatePort=63006
Change the
AlternatePort
to a port free of another web service.NOTE: For security reasons, HP does not recommend changing the main port from port 443.
HP SUM Windows network ports
Ports | Description | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Port 443 |
A secure data port used to transfer information. | |||||||||
Ports 445 and 137/138/139 (Port 137 is used only if you are using NetBIOS naming service.) |
Connects to the remote ADMIN$ share on target servers. These are the standard ports Windows servers use to connect to the remote file shares. If you can connect remotely to a remote Windows file share on the target server, then you have the right ports open. | |||||||||
Port 62286 |
Default for some internal communications. This port listens on the remote side if there is no conflict. If a conflict occurs, the next available port is used. | |||||||||
Ports 80 or 63000–63005 |
Logs are passed to the target and retrieved through an internal secure web server that uses port 80 if it is available. If it is not available, the Web server uses first available port in the range of 60000-63005. This support allows updates of the iLO and VC firmware without the need to access the host server. It also allows the servers to run VMware or other virtualization platforms to update the iLO firmware without requiring a server reboot or a migration of the virtual machines to other servers.
| |||||||||
Ports 21 or 63006–63010 |
You can use these FTP ports to perform switch updates. |
HP SUM Linux network ports
Ports | Description | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Port 22 |
Establishes a connection to the remote Linux server via SSH. For Integrity servers, HP SUM uses this port to discover target settings. | |||||||||
Port 443 |
A secure data port used to transfer information. | |||||||||
Port 62286 |
Default for some internal communications. It listens on the remote side if there is no conflict. If a conflict occurs, the next available port is used. | |||||||||
Ports 80 or 63000–63005 |
Updates are passed to the target and retrieved through an internal secure web server that uses port 80 if it is available. If it is not available, the Web server uses first available port in the range of 60000-63005. This support allows iLO and VC firmware updates without having to access the host server. It also allows servers running VMware or other virtualization platforms to update their iLO without having to reboot their server or to migrate their virtual machines to other servers.
| |||||||||
Ports 21 or 63006–63010 |
You can use these FTP ports to perform switch updates. |