FILE NAME: CP023219.scexe TITLE: HP Broadcom Online Firmware Upgrade Utility for Linux x86_64 VERSION: 2.10.15B REVISION: 0 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Enterprise and Mainstream Servers EFFECTIVE DATE: 04/14/2014 SUPERSEDES: CP023113.scexe Products Affected ================== HP Ethernet 10Gb 2-port 530 SFP+ Adapter HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Flex-10 10Gb 2-port 530FLB Adapter HP Flex-10 10Gb 2-port 530M Adapter HP Ethernet 1Gb 2-port 330i Adapter HP Ethernet 1Gb 2-port 332T Adapter HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter HP Ethernet 1Gb 4-port 331i Adapter HP NC7761 Gigabit Server Adapter HP NC7781 Gigabit Server Adapter HP NC7782 Gigabit Server Adapter HP NC320I PCIe Gigabit Server Adapter HP NC320M PCIe Adapter HP NC324I PCIe Dual Port Gigabit Server Adapter HP NC325M PCIe Quad Port Gigabit Server Adapter HP NC326I PCIe Dual Port Gigabit Server Adapter HP NC370i Multifunction Gigabit Server Adapter HP NC371i Multifunction Gigabit Server Adapter HP NC373T PCIe Multifunction Gig Server Adapter HP NC373F PCIe Multifunction Gig Server Adapter HP NC373i PCIe Multifunction Gig Server Adapter HP NC374m PCIe Multifunction Adapter HP NC382i DP Multifunction Gigabit Server Adapter HP NC382T PCIe DP Multifunction Gigabit Server Adapter HP NC382m DP 1GbE Multifunction BL-c Adapter HP NC532i Dual Port 10GbE Multifunction BL-c Adapter HP NC532m Dual Port 10GbE Multifunction BL-c Adapter HP NC105i PCIe Gigabit Server Adapter HP NC107i PCIe Gigabit Server Adapter HP Ethernet 10Gb 2-port 530T Adapter HP FlexFabric 10Gb 2-port 534FLB Adapter HP StoreFabric CN1100R Dual Port Converged Network Adapter HP FlexFabric 10Gb 2-port 534M Adapter HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter HP FlexFabric 10Gb 2-port 533FLR-T Adapter HP Ethernet 1Gb 2-port 332i� Adapter Operating Systems ================== Red Hat Enterprise Linux 6 Update 5 for AMD64/EM64T Red Hat Enterprise Linux 6 Update 4 for AMD64/EM64T Red Hat Enterprise Linux 5 Update 10 for AMD64/EM64T Red Hat Enterprise Linux 5 Update 9 for AMD64/EM64T SUSE LINUX Enterprise Server 11 Service Pack 3 for AMD64/EM64T SUSE LINUX Enterprise Server 11 Service Pack 2 for AMD64/EM64T Pre-requisites =============== ProLiant server supporting above operating systems 2GB RAM minimum tg3 Linux driver version >= 3.58b bnx2 Linux driver version >= 1.4.41 bnx2x Linux driver version >= 1.78.78 Description ============ This scexe contains the utilities and binaries for upgrading HP ProLiant Gigabit Ethernet NICs boot code, PXE/UEFI, IPMI, UMP, CLP, iSCSI, NCSI, FCoE and CCM code running under Linux x86_64 platform. Enhancements/Fixes =================== - Enhancements Description: - Bootcode: * Adding a NVRAM Control bit (offset 0x21C[1]) to enable/disable AutoNeg 1G Half Duplex advertisement on BCM5717/5719/5720 controllers. * Make port flapping avoidance feature available for all systems. - PXE: * Enhance driver to honor new control bit to disable Autoneg @ 1G Half Duplex advertisement on BCM5717/5719/5720 controllers. - Fixes Description: - Fixes an issue when certain adapters may become non-functional when they are updated with the Comprehensive Configuration Management (CCM) Firmware using the firmware smart components. The updated component prevents landing of the CCM Firmware on non-supporting adapters. - FCoE/iSCSI: * Fix system hang seen during early phase of storage ROM initialization on some OEM platforms. * Update to use indirect accesses to fix a boot failure issue seen when device's memory BAR is assigned to 64-bit. - iSCSI: * Fix the boot via Offload path failure seen on RedHat6.5. - Bootcode: * Fix an issue on 5719 chipset caused by lower core clock speed that may cause the device to report "no firmware running" when inbox driver is used. - PXE: * Fix a hang issue caused by PXE on systems with sensor device information when OCSR signature is not valid. Applies to BCM5717/5719/5720 controllers. * Fix an issue where BCV storage ROM might not load correctly on certain platforms. - NCSI: * Fix an issue where the remote KVM session is timed out when power cycle loop is performed for long duration on systems with 5719 or 5717. Table of Contents ================= Introduction Packaging Performing the Firmware Upgrade Firmware Upgrade Log Introduction ============ This file describes the procedure to use for upgrading firmware on HP Gigabit Server Adapters mentioned in the PRODUCTS AFFECTED section of this document. User guides and additional HP Network Adapter information can be found at: http://h18004.www1.hp.com/products/servers/networking/index-nic.html Packaging ========= This firmware upgrade utility is released in SCEXE format. The file is a single self-extracting executable that unpacks the component, runs it, and cleans up. This one-step process replaces the rpm format which would require three steps to install, execute and remove. Performing the Firmware Upgrade =============================== 1. This utility requires all the associated ethernet interfaces to be up. You can bring up an ethernet interface by using the following command: # ifup ethx or # ifconfig ethx up 2. Firmware can be upgraded interactively using following command: # ./CPxxxxxx.scexe 3. The help menu lists all available command line options. # ./CPxxxxxx.scexe -h Firmware Upgrade Log ==================== Results of the firmware upgrade are written to nicfwupg.log which gets saved in the current working directory. Note: Please refer to the adapter QuickSpecs for information on supported features. Copyright 2014 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies