| Project | docker-image|haproxy |
|---|---|
| Path | haproxy:2.6.14-alpine |
| Package Manager | apk |
CVE-2023-5363
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: A bug has been identified in the processing of key and initialisation vector (IV) lengths. This can lead to potential truncation or overruns during the initialisation of some symmetric ciphers.
Impact summary: A truncation in the IV can result in non-uniqueness, which could result in loss of confidentiality for some cipher modes.
When calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after the key and IV have been established. Any alterations to the key length, via the "keylen" parameter or the IV length, via the "ivlen" parameter, within the OSSL_PARAM array will not take effect as intended, potentially causing truncation or overreading of these values. The following ciphers and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB.
For the CCM, GCM and OCB cipher modes, truncation of the IV can result in loss of confidentiality. For example, when following NIST's SP 800-38D section 8.2.1 guidance for constructing a deterministic IV for AES in GCM mode, truncation of the counter portion could lead to IV reuse.
Both truncations and overruns of the key and overruns of the IV will produce incorrect results and could, in some cases, trigger a memory exception. However, these issues are not currently assessed as security critical.
Changing the key and/or IV lengths is not considered to be a common operation and the vulnerable API was recently introduced. Furthermore it is likely that application developers will have spotted this problem during testing since decryption would fail unless both peers in the communication were similarly vulnerable. For these reasons we expect the probability of an application being vulnerable to this to be quite low. However if an application is vulnerable then this issue is considered very serious. For these reasons we have assessed this issue as Moderate severity overall.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because the issue lies outside of the FIPS provider boundary.
OpenSSL 3.1 and 3.0 are vulnerable to this issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.4-r0 or higher.
References
- http://www.openwall.com/lists/oss-security/2023/10/24/1
- https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=0df40630850fb2740e6be6890bb905d3fc623b2d
- https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=5f69f5c65e483928c4b28ed16af6e5742929f1ee
- https://security.netapp.com/advisory/ntap-20231027-0010/
- https://www.debian.org/security/2023/dsa-5532
- https://www.openssl.org/news/secadv/20231024.txt
- https://security.netapp.com/advisory/ntap-20240201-0003/
- https://security.netapp.com/advisory/ntap-20240201-0004/
Improper Check for Unusual or Exceptional Conditions
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.
While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters.
Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q.
An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack.
DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate().
Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.4-r1 or higher.
References
- http://www.openwall.com/lists/oss-security/2023/11/06/2
- https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=34efaef6c103d636ab507a0cc34dca4d3aecc055
- https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=710fee740904b6290fef0dd5536fbcedbc38ff0c
- https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=db925ae2e65d0d925adef429afc37f75bd1c2017
- https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=ddeb4b6c6d527e54ce9a99cba785c0f7776e54b6
- https://www.openssl.org/news/secadv/20231106.txt
- https://security.netapp.com/advisory/ntap-20231130-0010/
- http://www.openwall.com/lists/oss-security/2024/03/11/1
Out-of-bounds Write
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications running on PowerPC CPU based platforms if the CPU provides vector instructions.
Impact summary: If an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences.
The POLY1305 MAC (message authentication code) implementation in OpenSSL for PowerPC CPUs restores the contents of vector registers in a different order than they are saved. Thus the contents of some of these vector registers are corrupted when returning to the caller. The vulnerable code is used only on newer PowerPC processors supporting the PowerISA 2.07 instructions.
The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However unless the compiler uses the vector registers for storing pointers, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service.
The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3. If this cipher is enabled on the server a malicious client can influence whether this AEAD cipher is used. This implies that TLS server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.4-r3 or higher.
References
- http://www.openwall.com/lists/oss-security/2024/01/09/1
- https://github.com/openssl/openssl/commit/050d26383d4e264966fb83428e72d5d48f402d35
- https://github.com/openssl/openssl/commit/5b139f95c9a47a55a0c54100f3837b1eee942b04
- https://github.com/openssl/openssl/commit/f3fc5808fe9ff74042d639839610d03b8fdcc015
- https://www.openssl.org/news/secadv/20240109.txt
- https://security.netapp.com/advisory/ntap-20240216-0009/
- https://security.netapp.com/advisory/ntap-20240426-0008/
- https://security.netapp.com/advisory/ntap-20240426-0013/
- http://www.openwall.com/lists/oss-security/2024/03/11/1
- https://security.netapp.com/advisory/ntap-20240503-0011/
CVE-2024-0727
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL to crash leading to a potential Denial of Service attack
Impact summary: Applications loading files in the PKCS12 format from untrusted sources might terminate abruptly.
A file in PKCS12 format can contain certificates and keys and may come from an untrusted source. The PKCS12 specification allows certain fields to be NULL, but OpenSSL does not correctly check for this case. This can lead to a NULL pointer dereference that results in OpenSSL crashing. If an application processes PKCS12 files from an untrusted source using the OpenSSL APIs then that application will be vulnerable to this issue.
OpenSSL APIs that are vulnerable to this are: PKCS12_parse(), PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes() and PKCS12_newpass().
We have also fixed a similar issue in SMIME_write_PKCS7(). However since this function is related to writing data we do not consider it security significant.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.4-r5 or higher.
References
- https://github.com/openssl/openssl/commit/09df4395b5071217b76dc7d3d2e630eb8c5a79c2
- https://github.com/openssl/openssl/commit/775acfdbd0c6af9ac855f34969cdab0c0c90844a
- https://github.com/openssl/openssl/commit/d135eeab8a5dbf72b3da5240bab9ddb7678dbd2c
- https://github.openssl.org/openssl/extended-releases/commit/03b3941d60c4bce58fab69a0c22377ab439bc0e8
- https://github.openssl.org/openssl/extended-releases/commit/aebaa5883e31122b404e450732dc833dc9dee539
- https://www.openssl.org/news/secadv/20240125.txt
- https://security.netapp.com/advisory/ntap-20240208-0006/
- http://www.openwall.com/lists/oss-security/2024/03/11/1
Out-of-bounds Write
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream busybox package and not the busybox package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
A heap-buffer-overflow was discovered in BusyBox v.1.36.1 in the next_token function at awk.c:1159.
Remediation
Upgrade Alpine:3.18 busybox to version 1.36.1-r6 or higher.
References
Use After Free
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream busybox package and not the busybox package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
A use-after-free vulnerability was discovered in xasprintf function in xfuncs_printf.c:344 in BusyBox v.1.36.1.
Remediation
Upgrade Alpine:3.18 busybox to version 1.36.1-r7 or higher.
References
Use After Free
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream busybox package and not the busybox package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
A use-after-free vulnerability in BusyBox v.1.36.1 allows attackers to cause a denial of service via a crafted awk pattern in the awk.c evaluate function.
Remediation
Upgrade Alpine:3.18 busybox to version 1.36.1-r7 or higher.
References
Use After Free
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream busybox package and not the busybox package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
A use-after-free vulnerability was discovered in BusyBox v.1.36.1 via a crafted awk pattern in the awk.c copyvar function.
Remediation
Upgrade Alpine:3.18 busybox to version 1.36.1-r7 or higher.
References
CVE-2023-6237
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: Checking excessively long invalid RSA public keys may take a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.4-r4 or higher.
References
- https://github.com/openssl/openssl/commit/0b0f7abfb37350794a4b8960fafc292cd5d1b84d
- https://github.com/openssl/openssl/commit/18c02492138d1eb8b6548cb26e7b625fb2414a2a
- https://github.com/openssl/openssl/commit/a830f551557d3d66a84bbb18a5b889c640c36294
- https://www.openssl.org/news/secadv/20240115.txt
- http://www.openwall.com/lists/oss-security/2024/03/11/1
- https://security.netapp.com/advisory/ntap-20240531-0007/
CVE-2024-2511
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions
Impact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service
This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation.
This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.4-r6 or higher.
References
- https://github.com/openssl/openssl/commit/7e4d731b1c07201ad9374c1cd9ac5263bdf35bce
- https://github.com/openssl/openssl/commit/b52867a9f618bb955bed2a3ce3db4d4f97ed8e5d
- https://github.com/openssl/openssl/commit/e9d7083e241670332e0443da0f0d4ffb52829f08
- https://github.openssl.org/openssl/extended-releases/commit/5f8d25770ae6437db119dfc951e207271a326640
- https://www.openssl.org/news/secadv/20240408.txt
- http://www.openwall.com/lists/oss-security/2024/04/08/5
- https://security.netapp.com/advisory/ntap-20240503-0013/
CVE-2024-4603
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: Checking excessively long DSA keys or parameters may be very slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (p parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the -check option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.5-r0 or higher.
References
- https://github.com/openssl/openssl/commit/3559e868e58005d15c6013a0c1fd832e51c73397
- https://github.com/openssl/openssl/commit/53ea06486d296b890d565fb971b2764fcd826e7e
- https://github.com/openssl/openssl/commit/9c39b3858091c152f52513c066ff2c5a47969f0d
- https://github.com/openssl/openssl/commit/da343d0605c826ef197aceedc67e8e04f065f740
- https://www.openssl.org/news/secadv/20240516.txt
- http://www.openwall.com/lists/oss-security/2024/05/16/2
- https://security.netapp.com/advisory/ntap-20240621-0001/
CVE-2024-5535
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists).
This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur.
This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.6-r0 or higher.
References
- https://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37
- https://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e
- https://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c
- https://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c
- https://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c
- https://github.openssl.org/openssl/extended-releases/commit/b78ec0824da857223486660177d3b1f255c65d87
- https://www.openssl.org/news/secadv/20240627.txt
- http://www.openwall.com/lists/oss-security/2024/06/27/1
- http://www.openwall.com/lists/oss-security/2024/06/28/4
- https://security.netapp.com/advisory/ntap-20240712-0005/
CVE-2024-4741
Detailed paths
NVD Description
This vulnerability has not been analyzed by NVD yet.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.6-r0 or higher.
CVE-2024-6119
Detailed paths
NVD Description
Note: Versions mentioned in the description apply only to the upstream openssl package and not the openssl package as distributed by Alpine.
See How to fix? for Alpine:3.18 relevant fixed versions and status.
Issue summary: Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address resulting in abnormal termination of the application process.
Impact summary: Abnormal termination of an application can a cause a denial of service.
Applications performing certificate name checks (e.g., TLS clients checking
server certificates) may attempt to read an invalid memory address when
comparing the expected name with an otherName subject alternative name of an
X.509 certificate. This may result in an exception that terminates the
application program.
Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address.
TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a reference identifier (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Remediation
Upgrade Alpine:3.18 openssl to version 3.1.7-r0 or higher.
References
- https://github.com/openssl/openssl/commit/05f360d9e849a1b277db628f1f13083a7f8dd04f
- https://github.com/openssl/openssl/commit/06d1dc3fa96a2ba5a3e22735a033012aadc9f0d6
- https://github.com/openssl/openssl/commit/621f3729831b05ee828a3203eddb621d014ff2b2
- https://github.com/openssl/openssl/commit/7dfcee2cd2a63b2c64b9b4b0850be64cb695b0a0
- https://openssl-library.org/news/secadv/20240903.txt