commit d99748864fa96e3c9a8379a710eb628298a29b64 Author: Greg Kroah-Hartman Date: Sat Dec 29 13:40:16 2018 +0100 Linux 4.9.148 commit 00279b505289f7529d9be2e78915d0483ffbd314 Author: Gustavo A. R. Silva Date: Wed Dec 19 18:00:15 2018 -0600 drm/ioctl: Fix Spectre v1 vulnerabilities commit 505b5240329b922f21f91d5b5d1e535c805eca6d upstream. nr is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_ioctl.c:805 drm_ioctl() warn: potential spectre issue 'dev->driver->ioctls' [r] drivers/gpu/drm/drm_ioctl.c:810 drm_ioctl() warn: potential spectre issue 'drm_ioctls' [r] (local cap) drivers/gpu/drm/drm_ioctl.c:892 drm_ioctl_flags() warn: potential spectre issue 'drm_ioctls' [r] (local cap) Fix this by sanitizing nr before using it to index dev->driver->ioctls and drm_ioctls. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181220000015.GA18973@embeddedor Signed-off-by: Greg Kroah-Hartman commit 4d5741aa2aaa1fb41abeeb46b0699299eea82d49 Author: Ivan Delalande Date: Thu Dec 13 15:20:52 2018 -0800 proc/sysctl: don't return ENOMEM on lookup when a table is unregistering commit ea5751ccd665a2fd1b24f9af81f6167f0718c5f6 upstream. proc_sys_lookup can fail with ENOMEM instead of ENOENT when the corresponding sysctl table is being unregistered. In our case we see this upon opening /proc/sys/net/*/conf files while network interfaces are being deleted, which confuses our configuration daemon. The problem was successfully reproduced and this fix tested on v4.9.122 and v4.20-rc6. v2: return ERR_PTRs in all cases when proc_sys_make_inode fails instead of mixing them with NULL. Thanks Al Viro for the feedback. Fixes: ace0c791e6c3 ("proc/sysctl: Don't grab i_lock under sysctl_lock.") Cc: stable@vger.kernel.org Signed-off-by: Ivan Delalande Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 6c976b42dc1540cf7cd0fc013928adf53b4f8791 Author: Sergey Senozhatsky Date: Thu Oct 25 19:10:36 2018 +0900 panic: avoid deadlocks in re-entrant console drivers commit c7c3f05e341a9a2bd1a92993d4f996cfd6e7348e upstream. From printk()/serial console point of view panic() is special, because it may force CPU to re-enter printk() or/and serial console driver. Therefore, some of serial consoles drivers are re-entrant. E.g. 8250: serial8250_console_write() { if (port->sysrq) locked = 0; else if (oops_in_progress) locked = spin_trylock_irqsave(&port->lock, flags); else spin_lock_irqsave(&port->lock, flags); ... } panic() does set oops_in_progress via bust_spinlocks(1), so in theory we should be able to re-enter serial console driver from panic(): CPU0 uart_console_write() serial8250_console_write() // if (oops_in_progress) // spin_trylock_irqsave() call_console_drivers() console_unlock() console_flush_on_panic() bust_spinlocks(1) // oops_in_progress++ panic() spin_lock_irqsave(&port->lock, flags) // spin_lock_irqsave() serial8250_console_write() call_console_drivers() console_unlock() printk() ... However, this does not happen and we deadlock in serial console on port->lock spinlock. And the problem is that console_flush_on_panic() called after bust_spinlocks(0): void panic(const char *fmt, ...) { bust_spinlocks(1); ... bust_spinlocks(0); console_flush_on_panic(); ... } bust_spinlocks(0) decrements oops_in_progress, so oops_in_progress can go back to zero. Thus even re-entrant console drivers will simply spin on port->lock spinlock. Given that port->lock may already be locked either by a stopped CPU, or by the very same CPU we execute panic() on (for instance, NMI panic() on printing CPU) the system deadlocks and does not reboot. Fix this by removing bust_spinlocks(0), so oops_in_progress is always set in panic() now and, thus, re-entrant console drivers will trylock the port->lock instead of spinning on it forever, when we call them from console_flush_on_panic(). Link: http://lkml.kernel.org/r/20181025101036.6823-1-sergey.senozhatsky@gmail.com Cc: Steven Rostedt Cc: Daniel Wang Cc: Peter Zijlstra Cc: Andrew Morton Cc: Linus Torvalds Cc: Greg Kroah-Hartman Cc: Alan Cox Cc: Jiri Slaby Cc: Peter Feiner Cc: linux-serial@vger.kernel.org Cc: Sergey Senozhatsky Cc: stable@vger.kernel.org Signed-off-by: Sergey Senozhatsky Signed-off-by: Petr Mladek Signed-off-by: Greg Kroah-Hartman commit 3926df1fb56c9d876cdec91b68d74c12dcfc7099 Author: Richard Weinberger Date: Wed Dec 26 13:32:11 2018 +0100 ubifs: Handle re-linking of inodes correctly while recovery commit e58725d51fa8da9133f3f1c54170aa2e43056b91 upstream. UBIFS's recovery code strictly assumes that a deleted inode will never come back, therefore it removes all data which belongs to that inode as soon it faces an inode with link count 0 in the replay list. Before O_TMPFILE this assumption was perfectly fine. With O_TMPFILE it can lead to data loss upon a power-cut. Consider a journal with entries like: 0: inode X (nlink = 0) /* O_TMPFILE was created */ 1: data for inode X /* Someone writes to the temp file */ 2: inode X (nlink = 0) /* inode was changed, xattr, chmod, … */ 3: inode X (nlink = 1) /* inode was re-linked via linkat() */ Upon replay of entry #2 UBIFS will drop all data that belongs to inode X, this will lead to an empty file after mounting. As solution for this problem, scan the replay list for a re-link entry before dropping data. Fixes: 474b93704f32 ("ubifs: Implement O_TMPFILE") Cc: stable@vger.kernel.org # 4.9-4.18 Cc: Russell Senior Cc: Rafał Miłecki Reported-by: Russell Senior Reported-by: Rafał Miłecki Tested-by: Rafał Miłecki Signed-off-by: Richard Weinberger [rmilecki: update ubifs_assert() calls to compile with 4.18 and older] Signed-off-by: Rafał Miłecki (cherry picked from commit e58725d51fa8da9133f3f1c54170aa2e43056b91) Signed-off-by: Sasha Levin commit d3741e0390287056011950493a641524f49fa05a Author: Sebastian Andrzej Siewior Date: Tue Nov 20 11:26:35 2018 +0100 x86/fpu: Disable bottom halves while loading FPU registers commit 68239654acafe6aad5a3c1dc7237e60accfebc03 upstream. The sequence fpu->initialized = 1; /* step A */ preempt_disable(); /* step B */ fpu__restore(fpu); preempt_enable(); in __fpu__restore_sig() is racy in regard to a context switch. For 32bit frames, __fpu__restore_sig() prepares the FPU state within fpu->state. To ensure that a context switch (switch_fpu_prepare() in particular) does not modify fpu->state it uses fpu__drop() which sets fpu->initialized to 0. After fpu->initialized is cleared, the CPU's FPU state is not saved to fpu->state during a context switch. The new state is loaded via fpu__restore(). It gets loaded into fpu->state from userland and ensured it is sane. fpu->initialized is then set to 1 in order to avoid fpu__initialize() doing anything (overwrite the new state) which is part of fpu__restore(). A context switch between step A and B above would save CPU's current FPU registers to fpu->state and overwrite the newly prepared state. This looks like a tiny race window but the Kernel Test Robot reported this back in 2016 while we had lazy FPU support. Borislav Petkov made the link between that report and another patch that has been posted. Since the removal of the lazy FPU support, this race goes unnoticed because the warning has been removed. Disable bottom halves around the restore sequence to avoid the race. BH need to be disabled because BH is allowed to run (even with preemption disabled) and might invoke kernel_fpu_begin() by doing IPsec. [ bp: massage commit message a bit. ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Borislav Petkov Acked-by: Ingo Molnar Acked-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Dave Hansen Cc: "H. Peter Anvin" Cc: "Jason A. Donenfeld" Cc: kvm ML Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Rik van Riel Cc: stable@vger.kernel.org Cc: x86-ml Link: http://lkml.kernel.org/r/20181120102635.ddv3fvavxajjlfqk@linutronix.de Link: https://lkml.kernel.org/r/20160226074940.GA28911@pd.tnic Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman commit 0d5fec5bda277187fc372fbd595cf78ec2345d15 Author: Colin Ian King Date: Tue Dec 18 17:29:56 2018 +0000 x86/mtrr: Don't copy uninitialized gentry fields back to userspace commit 32043fa065b51e0b1433e48d118821c71b5cd65d upstream. Currently the copy_to_user of data in the gentry struct is copying uninitiaized data in field _pad from the stack to userspace. Fix this by explicitly memset'ing gentry to zero, this also will zero any compiler added padding fields that may be in struct (currently there are none). Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable") Fixes: b263b31e8ad6 ("x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls") Signed-off-by: Colin Ian King Signed-off-by: Thomas Gleixner Reviewed-by: Tyler Hicks Cc: security@kernel.org Link: https://lkml.kernel.org/r/20181218172956.1440-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman commit dac731412750b9f1a8abd2f7032ee0be841ed406 Author: Dexuan Cui Date: Thu Dec 13 16:35:43 2018 +0000 Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels commit fc96df16a1ce80cbb3c316ab7d4dc8cd5c2852ce upstream. Before 98f4c651762c, we returned zeros for unopened channels. With 98f4c651762c, we started to return random on-stack values. We'd better return -EINVAL instead. Fixes: 98f4c651762c ("hv: move ringbuffer bus attributes to dev_groups") Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan Cc: Haiyang Zhang Cc: Stephen Hemminger Signed-off-by: Dexuan Cui Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1d060fede295f772f82f338fe2dcfe7daf41b3d5 Author: Christophe Leroy Date: Fri Dec 7 13:07:55 2018 +0000 gpio: max7301: fix driver for use with CONFIG_VMAP_STACK commit abf221d2f51b8ce7b9959a8953f880a8b0a1400d upstream. spi_read() and spi_write() require DMA-safe memory. When CONFIG_VMAP_STACK is selected, those functions cannot be used with buffers on stack. This patch replaces calls to spi_read() and spi_write() by spi_write_then_read() which doesn't require DMA-safe buffers. Fixes: 0c36ec314735 ("gpio: gpio driver for max7301 SPI GPIO expander") Cc: Signed-off-by: Christophe Leroy Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit 78d2d2762c6f05b62db4a0ec5c458f7b6e8114db Author: Russell King Date: Tue Dec 11 14:41:31 2018 +0000 mmc: omap_hsmmc: fix DMA API warning commit 0b479790684192ab7024ce6a621f93f6d0a64d92 upstream. While booting with rootfs on MMC, the following warning is encountered on OMAP4430: omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536] This is because the DMA engine has a default maximum segment size of 64K but HSMMC sets: mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; which ends up telling the block layer that we support a maximum segment size of 65535*512, which exceeds the advertised DMA engine capabilities. Fix this by clamping the maximum segment size to the lower of the maximum request size and of the DMA engine device used for either DMA channel. Signed-off-by: Russell King Cc: Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit b102595e99dfe3faa38dab7e9afbd1ec5e72aaf7 Author: Ulf Hansson Date: Mon Dec 10 17:52:38 2018 +0100 mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl commit e3ae3401aa19432ee4943eb0bbc2ec704d07d793 upstream. Some eMMCs from Micron have been reported to need ~800 ms timeout, while enabling the CACHE ctrl after running sudden power failure tests. The needed timeout is greater than what the card specifies as its generic CMD6 timeout, through the EXT_CSD register, hence the problem. Normally we would introduce a card quirk to extend the timeout for these specific Micron cards. However, due to the rather complicated debug process needed to find out the error, let's simply use a minimum timeout of 1600ms, the double of what has been reported, for all cards when enabling CACHE ctrl. Reported-by: Sjoerd Simons Reported-by: Andreas Dannenberg Reported-by: Faiz Abbas Cc: Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 71383ffbf2e700a09a6435f929a1bf316eaa2863 Author: Ulf Hansson Date: Mon Dec 10 17:52:37 2018 +0100 mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support commit ba9f39a785a9977e72233000711ef1eb48203551 upstream. In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards"), then intent was to prevent HPI from being used for some eMMC cards, which didn't properly support it. However, that went too far, as even BKOPS and CACHE ctrl became prevented. Let's restore those parts and allow BKOPS and CACHE ctrl even if HPI isn't supported. Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards") Cc: Pratibhasagar V Cc: Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 68f3ea1d87eb5e2096032e7d593d018f37f0778a Author: Ulf Hansson Date: Mon Dec 10 17:52:36 2018 +0100 mmc: core: Reset HPI enabled state during re-init and in case of errors commit a0741ba40a009f97c019ae7541dc61c1fdf41efb upstream. During a re-initialization of the eMMC card, we may fail to re-enable HPI. In these cases, that isn't properly reflected in the card->ext_csd.hpi_en bit, as it keeps being set. This may cause following attempts to use HPI, even if's not enabled. Let's fix this! Fixes: eb0d8f135b67 ("mmc: core: support HPI send command") Cc: Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit baecfd9178450a08b22622ae31d587d6adb98c4a Author: Jörgen Storvist Date: Thu Dec 13 17:32:08 2018 +0100 USB: serial: option: add Telit LN940 series commit 28a86092b1753b802ef7e3de8a4c4a69a9c1bb03 upstream. Added USB serial option driver support for Telit LN940 series cellular modules. Covering both QMI and MBIM modes. usb-devices output (0x1900): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1900 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option usb-devices output (0x1901): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1901 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by: Jörgen Storvist Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit ce1e78c7b0fd889cfa31433ea86d05e01026bce9 Author: Jörgen Storvist Date: Wed Dec 12 21:47:36 2018 +0100 USB: serial: option: add Fibocom NL668 series commit 30360224441ce89a98ed627861e735beb4010775 upstream. Added USB serial option driver support for Fibocom NL668 series cellular modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces. usb-devices output (QMI mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) usb-devices output (ECM mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by: Jörgen Storvist Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 8284907c981ff74cfe0a320075dd8ebd1ff8242d Author: Jörgen Storvist Date: Wed Dec 12 08:39:39 2018 +0100 USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode) commit cc6730df08a291e51e145bc65e24ffb5e2f17ab6 upstream. Added USB serial option driver support for Simcom SIM7500/SIM7600 series cellular modules exposing MBIM interface (VID 0x1e0e,PID 0x9003) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9003 Rev=03.18 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by: Jörgen Storvist Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 673187ceced1beddeab9ccdbc73787cbccd241bb Author: Tore Anderson Date: Sat Dec 8 19:05:12 2018 +0100 USB: serial: option: add HP lt4132 commit d57ec3c83b5153217a70b561d4fb6ed96f2f7a25 upstream. The HP lt4132 is a rebranded Huawei ME906s-158 LTE modem. The interface with protocol 0x16 is "CDC ECM & NCM" according to the *.inf files included with the Windows driver. Attaching the option driver to it doesn't result in a /dev/ttyUSB* device being created, so I've excluded it. Note that it is also excluded for corresponding Huawei-branded devices, cf. commit d544db293a44 ("USB: support new huawei devices in option.c"). T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 3 Cfg#= 3 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option Signed-off-by: Tore Anderson Cc: stable@vger.kernel.org [ johan: drop id defines ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit a3c90858c1be3276582ee5f694a39b65025af1a4 Author: Jörgen Storvist Date: Tue Dec 11 18:28:28 2018 +0100 USB: serial: option: add GosunCn ZTE WeLink ME3630 commit 70a7444c550a75584ffcfae95267058817eff6a7 upstream. Added USB serial option driver support for GosunCn ZTE WeLink ME3630 series cellular modules for USB modes ECM/NCM and MBIM. usb-devices output MBIM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0602 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim usb-devices output ECM/NCM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1476 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: Jörgen Storvist Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit e953031c6d837511b8316e9a979f872cc2509d38 Author: Mathias Nyman Date: Fri Dec 14 10:54:43 2018 +0200 xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only commit 45f750c16cae3625014c14c77bd9005eda975d35 upstream. The code to prevent a bus suspend if a USB3 port was still in link training also reacted to USB2 port polling state. This caused bus suspend to busyloop in some cases. USB2 polling state is different from USB3, and should not prevent bus suspend. Limit the USB3 link training state check to USB3 root hub ports only. The origial commit went to stable so this need to be applied there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 5501175cb1975239add62a521cfbedcf76b93d8d Author: Hui Peng Date: Wed Dec 12 12:42:24 2018 +0100 USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data commit 5146f95df782b0ac61abde36567e718692725c89 upstream. The function hso_probe reads if_num from the USB device (as an u8) and uses it without a length check to index an array, resulting in an OOB memory read in hso_probe or hso_get_config_data. Add a length check for both locations and updated hso_probe to bail on error. This issue has been assigned CVE-2018-19985. Reported-by: Hui Peng Reported-by: Mathias Payer Signed-off-by: Hui Peng Signed-off-by: Mathias Payer Reviewed-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 6f59058927cb1d654ccd2ac6b6c95b2c64ea9c3d Author: Bart Van Assche Date: Mon Jul 2 14:08:45 2018 -0700 ib_srpt: Fix a use-after-free in __srpt_close_all_ch() [ Upstream commit 14d15c2b278011056482eb015dff89f9cbf2b841 ] BUG: KASAN: use-after-free in srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] Read of size 4 at addr ffff8801269d23f8 by task check/29726 CPU: 4 PID: 29726 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f235cfe6154 Fixes: aaf45bd83eba ("IB/srpt: Detect session shutdown reliably") Signed-off-by: Bart Van Assche Cc: Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 5af2d106ca7b1777bbb4724521c6c130700ee7b8 Author: Mikulas Patocka Date: Tue Jul 3 13:34:22 2018 -0400 block: fix infinite loop if the device loses discard capability [ Upstream commit b88aef36b87c9787a4db724923ec4f57dfd513f3 ] If __blkdev_issue_discard is in progress and a device mapper device is reloaded with a table that doesn't support discard, q->limits.max_discard_sectors is set to zero. This results in infinite loop in __blkdev_issue_discard. This patch checks if max_discard_sectors is zero and aborts with -EOPNOTSUPP. Signed-off-by: Mikulas Patocka Tested-by: Zdenek Kabelac Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit f5cecc055048208051cfd2db1793f923668f29b6 Author: Jens Axboe Date: Tue May 8 15:09:41 2018 -0600 block: break discard submissions into the user defined size [ Upstream commit af097f5d199e2aa3ab3ef777f0716e487b8f7b08 ] Don't build discards bigger than what the user asked for, if the user decided to limit the size by writing to 'discard_max_bytes'. Reviewed-by: Darrick J. Wong Reviewed-by: Omar Sandoval Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin