Adding a node or other deployment type

HP SUM uses the same function to add all node and deployment types.

You can add a node using a specific IP address or by searching an IP address range.

Prerequisites

Know the IP address or DNS name of the node.
User login credentials for the node.
If you are planning to assign a baseline to a node, add the baseline first. For more information, see Adding a baseline.

Adding a single node by IP or DNS name

From the Nodes screen, click +Add Node. The name of this button changes if you are adding a different deployment type, for example, OA.
Select Add a single node or known range of nodes.
Enter the IP address, DNS name, range of IP addresses, or multiple addresses separated by comma. For example, entering 10.0.1.1–10.0.1.20 adds 20 nodes. 10.0.1.1, 10.0.1.2, 10.0.1.7 adds three nodes. HP SUM adds the nodes successfully if they use the same login credentials.

NOTE: If you are adding a VC node, use the IP address of the primary Enet module. All VC modules installed, including FC modules, are updated through the primary Enet module.
Enter a description for the node.
In the Type of node to add field, select the node type. If you do not know the node type, select Unknown. During the inventory process, HP SUM determines the node type. If you are adding a node from a Deployment Type screen, HP SUM automatically selects the node type.

Some nodes allow HP SUM to automatically discover and add associated nodes. For more information about associated nodes, see Associated nodes deployment behavior.

NOTE: Selecting the correct node type might help HP SUM complete adding the node faster.

Some nodes require information that is specific to the node. For more information about the requires for each node, see Node-specific additional details.

For more information on a Moonshot node, see Moonshot node overview.
(Optional) Select the baseline, additional package, or both to apply to this node.
(Optional) Select a group from the list, if you want to assign the node to a group.
Select one of the following:
- Use current credentials (requires existing trust relationship with the node): This option is for Windows nodes only.
- Enter administrator credentials: Enter the username and password for a user with administrator privileges on the node. Windows users can use domain\username if the user has administrator permission.

Linux and HP-UX nodes allow you to use sudo credentials to deploy updates without logging into the node with root credentials. To use sudo commands, you have to install sudo capabilities on the node.


	NOTE: Super user and sudo are not available for all nodes.

If you want to use sudo, in the Access Level field, select one of the following:

Click Use sudo to update components if you want to use sudo credentials.
Click Enter super user credentials to update components if you want to enter super user credentials.


	NOTE: If you are using super user credentials, enter normal user credentials in the Credentials field, and then add super user credentials in the Access Level field. HP SUM first logs in using the normal user credentials, and then uses the super user credentials to log into the super user account.

Click Add.

In the Added Nodes section, HP SUM displays the nodes you selected.

Adding a node by searching a range of addresses

From the Nodes screen, click +Add Node. The name of this button changes if you are adding a different deployment type, for example, OA.
Select Find nodes on network.
Click Find Nodes.
Select IP Address Range or Port Address.

: HP SUM can search a port in the range of 0–65535.
Enter a range of IP addresses for HP SUM to search, select one of the default ports or select Other and enter the port, and then click Search.

NOTE: HP SUM only searches one subnet/octet, the final four digits of an IPv4 address. HP SUM does not search IPv6 networks.

HP SUM displays the nodes it finds in the Available Nodes field.
Select the nodes you want to add from the Available Nodes section, and then click Add Nodes.
If you want to assign a baseline, select Baseline, Additional Packages in the Baseline to Apply field.
In the Credentials section, select whether to Use current user credentials (requires existing trust relationship with the node), Enter administrator credentials, or Enter SSH Key Credentials (not available for all nodes).

If you choose to enter administrator credentials, enter the Username and Password.
Click Add.

In the Added Nodes section, HP SUM displays the nodes you selected.
Click Cancel to go back to the Nodes screen.

Associated nodes deployment behavior

The following table describes which nodes HP SUM can automatically add and the order in which HP SUM deploys the nodes:

Node type	Types of associated nodes	Deployment behavior
Onboard Administrator	iLO, Integrity iLO, Virtual Connect, SAS Switches	Deploys the OA first and then other nodes.
Virtual Connect	Onboard Administrator	Deploys the VC first and then the OA.
FC Switch	Partner FC Switches	Deploys to the selected switch first and then to associated switches.
6Gb SAS BL Switches	Onboard Administrator	Deploys to the selected switch first and then to the OA.
iLO	Onboard Administrator, Server	Deploys to the iLO first and then the OA and servers.
Integrity iLO	None
Integrity multi-bladed conjoined servers	None
Server	None
Moonshot	None
Superdome 2/X	None


	NOTE: If you are running a mixed IPv4 and IPv6 environment, HP SUM might display the following issues: If you add an IPv6 iLO with associated nodes and the associated nodes are only configured with IPv4, HP SUM displays IPv6 nodes. HP SUM does not support IPv6 for SAS and FC switches.

Node-specific additional details

Some nodes have node-specific information that you need to include when you add a node.

Node type

Additional details

Windows

Enter what you want to do if HP SUM detects an update process on the node:
- Leave the update running and bypass the node
- Stop any currently running update process on the node and replace it with updates from this session

Linux

You can use SSH key credentials for Linux nodes. Enter the Username, Private Keyfile location, and Password (if required). The private key must use the PEM format.
Enter what you want to do if HP SUM detects an update process on the node:
- Leave the update running and bypass the node
- Stop any currently running update process on the node and replace it with updates from this session
Select the access level for this node:
- None
- Use sudo with credentials entered above
- Enter super user credentials to update components

HP-UX

You can use SSH key credentials for HP-UX nodes. Enter the Username, Private Keyfile location, and Password (if required). The private key must use the PEM format.
Enter what you want to do if HP SUM detects an update process on the node:
- Leave the update running and bypass the node
- Stop any currently running update process on the node and replace it with updates from this session
Select the access level for this node:
- None
- Use sudo with credentials entered above
- Enter super user credentials to update components

VMware Host

Select whether to use administrator credentials or open an authentication ticket with the VMware host of the vCenter. A ticket allows you to update the node regardless of the lockdown mode status.

If you select Enter vCenter details to get ticket (for authentication to host), enter the IP/DNS, Username, and Password for the host.


	NOTE: HP SUM does not automatically migrate VMware nodes if DRS or HA is enabled. For more information on migrating VMware nodes, see the documentation for OneView for VMware vCenter at http://www.hpe.com/info/ovvcenter/docs.

Onboard Administrator

Select whether you want to automatically add associated nodes. This adds all nodes in the chassis.
- If you are updating OAs and iLOs at the same time, select this for OA nodes so HP SUM detects associated iLO nodes. HP SUM can determine the proper deployment order when you deploy updates to the OA.
- If you do not provide credentials, HP SUM uses the credentials you provide for the OA for associated VCs.


	NOTE: If the OA is in FIPS mode, HP SUM does not support downgrading or rewriting firmware. HP SUM displays a message and turns off the downgrade and rewrite options.

Superdome 2/X Onboard Administrator

No node-specific settings.

SAS B/L Interconnect Switch

Select whether you want to automatically add associated nodes. For more information about associated nodes, see Associated nodes deployment behavior.

Fibre Channel Switch

Select whether you want to automatically add associated nodes. For more information about associated nodes, see Associated nodes deployment behavior.

iLO

Select whether you want to automatically add associated nodes. For more information about associated nodes, see Associated nodes deployment behavior.


	IMPORTANT: Do not add an iLO as a node if you are going to use it as part of an iLO Federation group.

Moonshot

iLO CM Administrator Credentials: Username and Password.
Switch Credentials: Username, Password, Enable Password. (Required only if you are updating the switch.)
Select Credentials are the same on both switches if Switch B uses the same credentials. If not, deselect this and enter the Switch B credentials.

Virtual Connect

Some VC options, such as VC Activation order, can be set from the Edit Node or Review/Deploy Node screen.


	NOTE: HP SUM cannot deploy updates to a Virtual Connect node that is managed by OneView.

Select whether you want to automatically add associated nodes. For more information about associated nodes, see Associated nodes deployment behavior.

Add the Associated Onboard Administrator’s credentials
- Use credentials above: Uses the same credentials you entered previously.
- Enter administrator credentials: Enter the credentials if they differ from the credentials you entered earlier.

prev	up	next
Using the Nodes screen	home	Editing a node


	NOTE: If you are adding a VC node, use the IP address of the primary Enet module. All VC modules installed, including FC modules, are updated through the primary Enet module.


	NOTE: Selecting the correct node type might help HP SUM complete adding the node faster.


	NOTE: HP SUM only searches one subnet/octet, the final four digits of an IPv4 address. HP SUM does not search IPv6 networks.